Leave Your Message

36V Lithium Battery Pack for Urban E-Bike & Delivery Fleet Retrofitting

High-efficiency, smart-BMS powered energy solutions engineered to accelerate urban fleet electrification, lower operational overhead, and maximize delivery uptime.
Inquire About Fleet Solutions →

The Industrial Evolution: Why 36V Lithium Battery Packs Dominate Urban E-Bikes

The global last-mile delivery market is experiencing unprecedented growth. Driven by the rapid expansion of e-commerce, on-demand grocery apps, and urban food delivery networks, the demand for fast, reliable, and sustainable transportation has never been higher. In dense metropolitan areas, traditional delivery vans are increasingly hindered by traffic congestion, parking restrictions, and zero-emission zones. This has positioned the electric bicycle (e-bike) as the ultimate vehicle for urban last-mile logistics.

⚡

Optimized Voltage Architecture

A 36V lithium battery pack represents the optimal engineering balance for urban e-bikes. It delivers sufficient torque and speed for navigating city terrains while remaining highly cost-effective, lightweight, and legally compliant with global micro-mobility regulations.

From an industrial perspective, the 36V architecture has become the standardized benchmark. It offers a sweet spot between system efficiency and thermal management. Compared to lower-voltage systems (like 24V), a 36V configuration draws less current to achieve the same power output, reducing resistive heat losses (I²R losses) in the wiring and motor. This translates directly into a longer operating range per charge cycle—a critical performance metric for commercial delivery fleets operating up to 10-12 hours per day.

E-Bike & Delivery Fleet Lithium Retrofitting: The Smart Capital Move

For fleet operators managing hundreds of utility vehicles or legacy lead-acid/gasoline delivery bikes, the capital expenditure of purchasing a completely new electric fleet can be prohibitive. Lithium retrofitting provides a highly sustainable, cost-efficient alternative. By upgrading existing chassis with high-performance 36V lithium battery packs, fleet operators can instantly modernize their operations.

Retrofitting extends the operational lifespan of existing vehicle assets while dramatically improving their utility. Lead-acid batteries, historically used in utility fleets, suffer from rapid degradation, low energy density, and extreme voltage sag under load. Upgrading to a custom 36V lithium battery pack reduces battery weight by up to 70%, increases range by up to 3x, and offers a flat discharge curve that ensures consistent motor performance from 100% down to 10% State of Charge (SoC).

📈

Total Cost of Ownership (TCO) Reduction

Lithium retrofitting cuts maintenance costs by eliminating lead-acid replacements. With over 1,000 to 2,000 cycles, lithium packs outlast lead-acid equivalents by 4 to 5 times.

🔋

Modular Battery Swapping Integration

Custom 36V packs can be designed with quick-release housings, enabling instant battery swapping at centralized hubs to keep delivery riders on the road continuously.

Deep-Dive Application Scenarios for 36V Lithium Packs

Commercial fleet operations are diverse, and a one-size-fits-all battery rarely succeeds. Here, we analyze three distinct application scenarios where customized 36V lithium battery packs play a vital role:

🍕

High-Frequency On-Demand Food Delivery

Food delivery riders require rapid acceleration, frequent stops, and maximum uptime. Our custom 36V packs for this scenario utilize high-rate discharge cells that handle constant stop-and-go cycles without overheating. Integrated with smart BMS, these batteries support fast-charging protocols, allowing riders to top up their batteries to 80% during short breaks, maximizing daily delivery capacity.

📦

Heavy-Duty Cargo E-Bikes

Urban cargo bikes carry payloads exceeding 150 kg, requiring sustained high current draw, particularly when climbing hills. A standard e-bike battery would experience severe thermal stress under these conditions. AOVOLT designs heavy-duty 36V packs using robust structural frames, thick pure copper busbars, and high-capacity 21700 cells to ensure reliable power delivery without thermal runaway risk.

🚲

Shared Municipal E-Bike Schemes

Shared public mobility fleets face vandalism, harsh outdoor exposure, and continuous usage. Batteries for this application must feature IP67-rated waterproof aluminum enclosures, secure mechanical locking mechanisms, and advanced communication protocols (CAN-bus/UART) to transmit real-time GPS, SoC, and battery health data to the fleet management software.

Advanced Battery Management & Cell Selection

The performance of a 36V lithium-ion battery pack is heavily dependent on two core elements: cell selection and the Smart Battery Management System (BMS). At AOVOLT, we analyze the specific operating environment of the fleet to determine the optimal configuration.

Cell Chemistry: Li-Ion vs. LiFePO4

For urban delivery fleets where range and weight are the primary constraints, we utilize high-energy-density Nickel Manganese Cobalt (NMC) 18650 or 21700 cylindrical cells. These cells allow us to pack maximum capacity (often up to 20Ah or 720Wh) into a compact, lightweight frame that fits standard e-bike downtubes. For industrial utility fleets where cycle life and safety are paramount, we offer Lithium Iron Phosphate (LiFePO4) configurations, which deliver up to 3,000 charge cycles at 80% Depth of Discharge (DoD).

Smart BMS: The Brain of the Pack

A fleet battery is only as good as its BMS. Our smart BMS boards feature multi-tier protection: over-charge, over-discharge, over-current, short-circuit, and dual-temperature sensors. For fleet operators, we integrate communication protocols like CAN-bus, RS485, and Bluetooth, allowing fleet managers to run remote diagnostics, track battery degradation (State of Health - SoH), and prevent on-road failures before they occur.

About AOVOLT

AOVOLT is a lithium battery brand focused on custom battery pack design and manufacturing for global B2B customers. Founded on years of experience in consumer lithium batteries, AOVOLT now provides battery solutions for electric mobility, drones, power tools, robots, lead-to-lithium replacement, marine power, outdoor energy and industrial equipment.

We help wholesalers, distributors, equipment manufacturers, mobility brands, robot companies, repair markets and private label customers develop reliable battery products from project evaluation and sample testing to mass production and global shipment.

Contact Us→
AOVOLT Factory Production

Company Story

AOVOLT started with consumer lithium battery applications, including batteries for smartphones, tablets, laptops, gaming devices and portable electronics. This early experience helped us build strong expertise in compact battery structure, cell selection, BMS protection and mass production quality control.

As market demand expanded toward electric mobility, industrial electrification and lead-acid to lithium replacement, AOVOLT developed into a custom battery pack manufacturer focused on LiFePO4, lithium-ion and sodium-ion battery solutions.

Today, AOVOLT serves global B2B customers with custom battery packs for electric mobility, drones, power tools, robots, AGVs, AMRs, marine power, outdoor energy and industrial equipment. We design each battery solution based on real application needs, including voltage, capacity, discharge current, BMS, casing, connector, charger, communication and working environment.

What We Do

Electric Mobility Battery Solutions

Electric Mobility Battery

AOVOLT develops custom lithium battery packs for e-bikes, electric motorcycles, electric tricycles, low-speed vehicles, golf carts and battery swapping systems.

High Discharge Drone Battery

Drone Battery

AOVOLT provides lightweight and high-discharge battery packs for FPV drones, agricultural spraying drones, inspection drones and heavy-lift UAV applications.

Tool Replacement Battery Packs

Tool Replacement Battery

AOVOLT supplies replacement lithium battery packs for cordless power tools, garden tools, vacuum cleaners and handheld professional devices.

Lead-to-Lithium Battery Retrofitting

Lead-to-Lithium Battery

AOVOLT offers LiFePO4 battery replacement solutions for golf carts, forklifts, AGVs, marine systems, outdoor power and industrial vehicles.

Robot and AGV Battery Packs

Robot Battery

AOVOLT designs custom battery packs for service robots, AGVs, AMRs, inspection robots, delivery robots, cleaning robots and warehouse automation systems.

Custom Battery Pack Engineering

Custom Battery Pack

AOVOLT supports project-based LiFePO4, lithium-ion, sodium-ion and LiPo battery pack customization from requirement review to sample testing and mass production.

Who We Serve

⚙

Wholesalers

Stable battery supply and OEM/ODM packaging for local distribution markets.

🌎

Distributors

Battery product lines for mobility, drones, tools, robots, marine and industrial use.

💻

E-Commerce

Replacement and private label batteries for online sales channels.

⚡

Battery Brands

Custom battery development for branded product series.

🏭

OEMs

Battery packs matched with device power, size and working environment.

🔧

Repair Markets

Replacement batteries for aging, weak or damaged original packs.

🚚

Fleet Operators

Lithium battery solutions for delivery, rental, golf cart and AGV fleets.

🤖

Robot Companies

Smart battery packs for AGVs, AMRs, service and delivery robots.

⚓

Marine Suppliers

LiFePO4 battery solutions for boats, trolling motors and marine backup power.

🛠

Industrial Projects

Custom battery packs for forklifts, utility vehicles and special equipment.

Our Capabilities

01

Battery Solution Design

02

Cell Selection

03

BMS Matching

04

Structure Design

05

OEM/ODM Manufacturing

06

Testing & Quality Control

07

Private Label Packaging

08

Export Document Support